There are the complete installation instructions to Flash or write IMEI on Qualcomm, MTK, SpreadTrum devices using Read&Write Tool.
Your device should be based on Qualcomm, MTK, SpreadTrum chipset and have atleast 20-30 percent of device battery.
- By using Read And Write Tool you can flash IMEI on Qualcomm, MTK, SpreadTrum chipset devices easily
- If your device is MediaTek then you can flash IMEI using SN Write Tool
- if you have Spreadtrum Device then you can flash IMEI using WriteIMEI Tool
- Do it on your own risk.
How To Install IMEI Using Read&Write Tool
Step#1: Download and extract Read&Write Tool on PC. After extracting you will see the following files:
Step#2: Open WRTool.exe.
Step#3: After Read&Write Tool is launched, you will see the following screen:
Step#4: Open Settings by Clicking on File > Config (to open settings).
Step#5: After launching the setting, you will see the following screen:
Step#6: Under PlateformConfig select your Device Chipset Type (for example, if you have MediaTek device then choose MTK, if you have Qualcomm device then choose QQcomm and if you have Spreadtrum device then choose Spreadtrum).
Step#7: Under ComPort select USB.
Step#8: Under DataFileConfig choose BP and AP file from your device stock firmware file (both files comes with the MediaTek stock firmware and if you don’t have MediaTek device then you don’t have to add the BP and AP file).
Step#9: If you have dual SIM device then select the IMEI1 and IMEI2 then Click on OK to continue.
Step#10: Write the IMEI in the IMEI1 and IMEI2 Box (if you have dual sim device).
Step#11: Click on Write to begin the Write or Flash Process.
Step#12: Usually Writing IMEI flashing takes a minute to complete. Once IMEI writing is done you will see green Pass message on screen.