ABOUT SMART FLASH TOOL
Here’s a Guideline For Flash Stock Firmware Rom & Any Custom ROM via Smart Flash Tool (SP FLASH TOOL) On Windows PC or Laptops
Before Flash Requirments
Your Android Phone Must Have 50 to 50 Percent of Battery To Continue The Flashing Processing.
Flash or Install Stock Firmware Rom via Smart Phone Flash Tool
Step:1 Download & Install USB Android Drivers On Your Computer or Laptop. If Your Device already have USB Drivers in your PC Then Skip this Step.
Step:2 Switch Off Your Android Phone & Remove The Battery From Phone (If Battery is Removable)
Step:3 Download Stock Firmware or Custom Rom File Which you want to Flash on Your Android Phone & Extract it On your PC or Laptop
Step:4 Download & Extract (SP Flash Tool) on Your Computer. After Your Extract Flash Tool You will see The Following Files
Step:5 Open The SP Flash Tool.exe & (You Will get this form in the extracted Files.
Step:6 Run SP Flash Tool When Tool is Launched, Tap on The Download Tap.
Step:7 In The Download Option, Tap on The Scatter-Loading Button.
Step:8 Locate Scatter File ( Get Scatter File in The Stock Rom Firmware)
Step:9 Now Tap on The Download Option, To Start The Flashing Process.
Step:10 Connect Your Android Phone With PC via Data USB Cable (If it is Removable – Without Battery) After Connect The Phone To The Computer Press Volume Down & Volume Up Key, Now Your Computer Detect your Android Device.
Step:11 Once The Flashing Process is Complete. A Green Ring will Appear.
Step:12 Disconnect Your Android Phone From The PC/Computer
Congratulation, Your Smart Phone is Completely Running On The Stock Firmware Rom which you Have Downloaded