Here is the complete guide of flash or installing Motorola Stock Firmware Through RSD Lite Flash Tool. Read all instruction from here and flash your Motorola device.
- During flashing your Motorola device data, account and file stored in internal memory will be deleted. So, you must back up it before lose them.
- Try to keep your battery at minimum 80% of battery power.
- To avoid failed connections between Motorola phone and the computer or the laptop, make sure to always use an original USB cable.
- Driver for your Motorola Device must installed correctly to ensure your device detected on the computer. You can download this driver from link below.
How To Flash Motorola Stock Firmware
Step#1: Download Motorola USB Drivers for your computer/Laptop or pc.
Step#2: Download RSD Lite Flash Tool And install it on your Computer
Step#3: Download the Rom and extract this flash file on your computer/laptop
Step#4: Boot Your Motorola device to Fastboot mode by press and hold both volume down + volume up button.
Step#5: Connect your Motorola phone to the computer via USB cable.
Step#6: Make sure your Motorola Device successfully detected on your computer via Fastboot mode.
Step#7: If failed to connect, try to use original USB cable or change your computer port.
Step#8: Open your RSD Lite software on your computer from start menu.
Step#9: Now, click the button assigned with red circle shown at picture above to load Motorola firmware. Firmware file should have this extensions (*.xml, *.shx, *.sbf, *.hs, etc)
Step#10: Once your Motorola firmware successfully load, RSD lite flash tool should look like picture shown below.
Step#11: click start button. to begin the flashing process.
Congrats! Your phone is upgraded or on new Firmware